NIST- SRM 937 Iron Metal - 深圳德博瑞生物官网

NIST- SRM 937 Iron Metal

产品详情如下，更多产品价格和货期，请咨询客服，供实验室使用！

This Standard Reference Material (SRM) is a material of known purity intended for use as an assay standard for iron.SRM 937 consists of electrolytic grade iron to be used primarily for the calibration of instrumentation and standardization of procedures and for the routine evaluation of daily working standards used in these procedures. A unit of SRM 937 consists of 50 g of iron metal in the form of chips sized between 0.5 mm and 1.8 mm mesh.

The certified value shown is based on dissolution of representative samples in hydrochloric acid followed by reduction of the iron with stannous chloride and oxidation of the excess stannous chloride with mercuric chloride. Most of the iron was oxidized with a known mass of potassium dichromate and the remaining iron was titrated with potassium dichromate solution. The estimated uncertainty shown is based on judgement and includes allowances for known sources of possible error.

Chemical analyses made on representative samples showed the presence of the following elements at the indicated mass fraction (expressed as %): nickel, 0.041 %; silicon, 0.008 %; carbon, chromium, and cobalt, each 0.007 %;copper, manganese, oxygen, and sulfur, each 0.006 %; molybdenum, 0.005 %; phosphorus, 0.003 %; germanium and nitrogen, each 0.001 %; total of all other elements, < 0.003 %.

The iron mass fraction (expressed as %), by difference, is 99.89 + %. This is in agreement with the certified value NIST- SRM 937

本标准参考物质（SRM）是一种已知纯度的材料，旨在用作铁的分析标准。SRM 937由电解级铁组成，主要用于仪器校准和程序标准化，以及对这些程序中使用的日常工作标准进行常规评估。SRM 937的一个单元由50克铁金属组成，其为尺寸在0.5毫米至1.8毫米筛网之间的碎屑形式。

所示的认证值是基于代表性样品在盐酸中的溶解，然后用氯化亚锡还原铁，并用氯化汞氧化过量的氯化亚锡。大部分铁用已知质量的重铬酸钾氧化，剩余的铁用重铬酸钾溶液滴定。所示的估计不确定性是基于判断的，包括已知可能误差源的裕度。

对代表性样品进行的化学分析显示，在指示的质量分数（以%表示）下，存在以下元素：镍，0.041%；硅，0.008%；碳、铬和钴，每种含量为0.007%；铜、锰、氧和硫，每种含量为0.006%；钼，0.005%；磷，0.003%；锗和氮，各自为0.001%；所有其他元素的总和，<0.003%。

铁的质量分数（以%表示），按差值计算，为99.89+%。这与认证值一致 Iron Metal

部分相关产品如下，更多相关产品的详细信息，请咨询客服，供实验室使用！

相关文章